CAD / CAM Prep and Polish Kit - LUS60
The kit includes all the preparation instruments for state-of-the-art preparation of CAD/CAM manufactured crowns and bridges. A highly polished result can even be achieved following corrections to the ceramic by using a 3-stage polisher.
- To Be Used On : Preparation
- Extraoral / Intraoral : Intraoral
Kit Contents
Carbide
HM31C-012-FG - Orange, Round End Cross-Cut, Ø = 1.2mm, FG
Diamonds
808L-016-FG - Blue, Long Pear, Medium, Ø = 1.6mm, FG
828Y-017-FG - Yellow, Coarse, 2.0mm Occlusal Reduction, FG
834-021-FG - 0.5mm Veneer Depth Cutter, Medium, Ø = 2.1mm, FG
839R-012-FG - Blue, Beveled Edge, Medium, Ø = 2.1mm, FG
846RG-016-FG - Green, Round Edge, Coarse, Ø = 1.6mm, FG
847RF-018-FG - Red, Round Edge Taper, Fine, Ø = 1.8mm, FG
847RG-018-FG - Green, Round Edge Taper, Coarse, Ø = 1.8mm, FG
852F-016-FG - Green, Round End Taper, Fine, Ø = 1.6mm, FG
852G-016-FG - Green, Round End Taper, Coarse, Ø = 1.6mm, FG
855LF-009-FG - Red, Round End Taper, Fine, Ø = 0.9mm, FG
Polishers
9743C-040-RA-Y/O - Yellow/Orange, Point, Extra-Fine, Ø = 4.0mm, RA
9743F-040-RA-R/O - Red/Orange, Point, Fine, Ø = 4.0mm, RA
9743G-040-RA-GR/O - Green/Orange, Point, Coarse, Ø = 4.0mm, RA
9744C-060-RA-Y/O - Yellow/Orange, Cup, Extra-Fine, Ø = 6.0mm, RA
9744F-060-RA-R/O - Red/Orange, Cup, Fine, Ø = 6.0mm, RA
9744G-060-RA-GR/O - Green/Orange, Cup, Coarse, Ø = 6.0mm, RA
Bur Block
OR603 - Orange, 6 RA & 12 FG Slots
Made in Germany
