DCI

RAMVAC Cogged-Type Belt, 650 mm, Bulldog 855 w/ 615 RPM Cogged type belt Original OEM replacement "DentalEZ" and "RAMVAC" are registered trademar...

RAMVAC Cogged-Type Belt, 545 mm, Bulldog QT 3 Cogged type belt Original OEM replacement "DentalEZ" and "RAMVAC" are registered trademarks of Dent...

Pressure Switch, Unloading for Single Head Compressors Starts and stops compressor motors OEM part numbers: Apollo ECS10450MDT/Castle 3-08-0111-1...

Pressure Switch, Unloading for Dual & Triple Head Compressors Starts and stops compressor motors OEM part numbers: Apollo ECS10455MDT/Castle ...

Post, Light, 30" x 2" OD, Gray 2" Diameter Post painted with a scratch resistant powder coat finish

Post, Light,  24" x 2" OD, Gray 2" Diameter Post painted with a scratch resistant powder coat finish

Post Mount, 2",  Anodized 2" post mount For mounting folding and telescoping arm assemblies to 2" diameter post Accepts 1/2" O.D. pin OEM part n...

Post Clamp, Butterfly, White Use with Light Posts .OEM part numbers: Beaverstate Dental 146-001Parts Warehouse R-C1811-2

Pilot Actuated Relay Valve, Normally Open Requires actuator #7096 10-32 ports 2-way (non-relieving) For air or water

O-Ring, Viton, .180 I.D. X .040 Width Material - Viton I.D. x Cross Section - .180 x .040 Package of 12

O-Ring, Viton, .053 I.D. X .064 Width Material - Viton I.D. x Cross Section - .053 x .064 Package of 12

O-Ring, Buna-n, 2.109 I.D. X .139 Width Material - Buna-n I.D. x Cross Section - 2.109 x .139 Package of 12 OEM part number: Pelton & Crane ...

O-Ring, Buna-n, .101 X .070 Width, -005 Material - Buna-n I.D. x Cross Section - .101 x .070 Package of 12 OEM part numbers: A-dec 030.005.00A-d...

O-Ring, Viton, .081 I.D. X .103 Width Material - Viton I.D. x Cross Section - .081 x .103 Package of 12

O-Ring, Buna-n, .070 I.D. X .070 Width Material - Buna-n I.D. x Cross Section - .070 x .070 Package of 12 For use in A-dec Century II Control Blo...

O-Ring, Buna-n, .057 I.D. X .040 Width Material - Buna-n I.D. x Cross Section - .057 x .040 Package of 12

O-Ring, Buna-n, .029 I.D. X .040 Width Material - Buna-n I.D. x Cross Section - .029 x .040 Package of 12 OEM part numbers: A-dec 035.003.00A-de...

Non-Slip Pad, 6" x 11.5" Non-Skid Pad OEM part numbers: A-dec 39.0790.00A-dec 39-0790-00Beaverstate Dental 010-060Dentech 01-04-549

Midwest XGT & Stylus w/ Swivel, Flush System HP Adapter

ASSY VALVE MICRO 2-WAY

ISO-C 6-Pin Power Optic HP Tubing, 12', LT Sand Picture shown is tubing in gray color 6-pin connector for ISO-C Handpiece 6-pin, 4-Hole asepsis h...

ISO-C 6-Pin Power Optic HP Tubing, 12', Dark Surf Picture shown is tubing in gray color 6-pin connector for ISO-C Handpiece 6-pin, 4-Hole asepsi...

ISO-C 6-Pin Economy HP Illumination System, 5',  Sterling Gray For a system where the lamp is in handpiece or swivel adapter Includes Transformer...

ISO-C 6-Pin Economy HP Illumination System, 5', Gray For system where lamp is in handpiece or swivel adapter Includes Transformer, 110 VAC to 3.6...

Inline Filter 74 Micron Filtration, Disposable 74 Micron filtration 2-1/8" long x 13/16" diameter 1/4" barb For use with air or water Nylon const...

Indicator Light, Amber, MDT, Tuttnauer (Tuttnauer #P-77117-145) (MDT #250056921) 125 VAC - 1/3 watt Includes mounting clip OEM part numbers: MDT...

HP Tubing, 3 Hole w/CT, Asepsis Straight Gray Straight 7 ft. with Connector OEM part numbers: A-dec 98-0300-00A-dec 98.0300.00A-dec 98-1093-00A-...

HP Block Drive Air Adjusting Screw OEM part number: Parts Warehouse R-V1842-3

SHROUD FC 1-HOLE RIGHT GRAY

Hospital Grade Plug, Right Angle, Male Hospital-grade 115 volt AC / 20 amp Right angle OEM part numbers: Chapman-Huffman 15-501RPI RPP032

Horseshoe Holder Bar w/Standard Holders, White Bar and holders Includes three holders 1/2" O.D. pin White powder coat

Horizontal Mount, 1/2", White Horizontal mount For mounting folding and telescoping arms to flat horizontal surfaces Mounting plate 4" x 4" Accep...

Holder Bar, 8", Black Holder Bar, Quad 8" For use with 4592 and 5940 through 5970 holders Precision milled aluminum Mounting hardware Black holde...

Holder Bars - Black Holder Bar, Dual 4" For use with 4592 and 5940 through 5970 holders Precision milled aluminum Mounting hardware Black holder b...

Holder Bar, 3 Position, Holds SE & HVE by Tip Holds SE and HVE by Tip Mounts on end of 1/2" O.D. bar Holder for syringe and vacuum valves

Holder Bar, 2", Gray Holder Bar, Single 2" For use with 4592 and 5940 through 5970 holders Precision milled aluminum Mounting hardware Gray holder...

Heyco Snap-In Bushing, Black, 3/4" Package of 5   

Heyco Snap-In Bushing, Black, 1-1/2" Package of 5 

Foot Control, Wet/Dry, Sterling Tubing   (Product shown with gray tubing) Foot Control without Signal Relay Responsive, high volume, variable flo...

Foot Control, Wet/Dry, Dark Surf Tubing  (Product shown with gray tubing) Foot Control without Signal Relay Responsive, high volume, variable flo...

Foot Control, Wet/Dry w/Signal Relay, LT Sand Tubing  (Product shown with gray tubing) Foot Control with Signal Relay Responsive, high volume, v...

Foot Control, Wet/Dry & Chip Blower w/Signal Relay, Gray Tubing Foot Control with Signal Relay Responsive, high volume, variable flow Valve c...

Foot Control, Wet/Dry & Chip Blower w/Signal Relay, Dark Surf Tubing  (Product is shown with gray tubing) Foot Control with Signal Relay Resp...

Foot Control, Scaler, LT Sand Tubing  (Product shown with gray tubing) Foot Control without Signal Relay Responsive, high volume, variable flow...