Internal Lift Control - Internal Sinus Lift System - CSL00

For the internal sinus lift, MEISINGER offers the Internal-Lift-Control, two different Crestal-Lift-Control systems and the Lift-Control Plus.

During the performance of the internal sinus lift with the Internal-Lift-Control, bone inside the implant site is displaced in the direction of the maxillary sinus, while the Schneiderian membrane is lifted. This procedure is suitable for the augmentation of small vertical defects with a residual bone height of more than 6 mm.

The elevation of the Schneiderian membrane occurs during the drilling process portion of the Crestal-Lift-Control procedure. The atraumatic design of the Crestal Drill with its four cutting edges and concave head allows for the safe formation of a conical bone flap and is ideally suited for collecting bone chips. Additionally, the stop sleeve system, which is tailored to the special instruments, prevents the membrane from being injured or punctured.

Kit Contents

Elevators

SL25 - Sinus Lift, Length = 16.0mm, Ext. Ø = 2.5mm
SL30 - Sinus Lift, Length = 16.0mm, Ext. Ø = 3.0mm
SL35 - Sinus Lift, Length = 16.0mm, Ext. Ø = 3.5mm
SL40 - Sinus Lift, Length = 16.0mm, Ext. Ø = 4.0mm
SL45 - Sinus Lift, Length = 16.0mm, Ext. Ø = 4.5mm
SL50 - Sinus Lift, Length = 16.0mm, Ext. Ø = 4.5mm

Expansion Burs

B2004 - Blue/Green, Expansion Drill, Length = 12.0mm, Ext. Ø = 2.7mm, RAL
E2004 - Red/Blue, Expansion Drill, Length = 12.0mm, Ext. Ø = 3.4mm, RAL
F2004 - Red/Blue, Expansion Drill, Length = 12.0mm, Ext. Ø = 3.9mm, RAL
G2004 - Purple/Green, Expansion Drill, Length = 11.0mm, Ext. Ø = 4.5mm, RAL
H2004 - Red/Green, Expansion Drill, Length = 11.0mm, Ext. Ø = 4.9mm, RAL

Impact Tool

SL0 - Length = 100.0mm
SL1 - Impact Tool, Length = 133.0mm

Pilot Burs

B2001 - Length = 15.0mm, Ext. Ø = 1.6mm, RAL
G2001 - Length = 11.0mm, Ext. Ø = 3.4mm, RAL

Steel Burs

186RF-018-RA - Initial Bur, Length = 12.0mm, Ext. Ø = 1.8mm, RA

Optionally Available:

HI070 - Teflon Coated Mallet, Length = 195.0mm

Made in Germany