Skip to content

Meisinger

  • Carbide Cutter, Medium, Cross Cut, Inverted Pear, 6mm Ø, HP - HM75GX-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Medium, Cross Cut, Inverted Pear, 6mm Ø, HP - HM75GX-060-HP

    Meisinger

    Cross-cut, medium, blue ring, for trimming large surfaces of non-precious alloys and acrylics. Superior durability and sharpness ensures effortles...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Medium, Cross Cut, Inverted Pear, 4mm Ø, HP - HM75GX-040-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Medium, Cross Cut, Inverted Pear, 4mm Ø, HP - HM75GX-040-HP

    Meisinger

    Cross-cut, medium, blue ring, for trimming large surfaces of non-precious alloys and acrylics. Superior durability and sharpness ensures effortles...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Coarse, Inverted Pear, 7mm Ø, HP - HM75G-070-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Coarse, Inverted Pear, 7mm Ø, HP - HM75G-070-HP

    Meisinger

    Plain cut, coarse, green ring, for rapid and effective trimming of acrylics and plaster. Superior durability and sharpness ensures effortless and ...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Coarse, Inverted Pear, 6mm Ø, HP - HM75G-060-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Coarse, Inverted Pear, 6mm Ø, HP - HM75G-060-HP

    Meisinger

    Plain cut, coarse, green ring, for rapid and effective trimming of acrylics and plaster. Superior durability and sharpness ensures effortless and ...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Fine, Cross Cut, Inverted Pear, 6mm Ø, HP - HM75FX-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Fine, Cross Cut, Inverted Pear, 6mm Ø, HP - HM75FX-060-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Fine, Cross Cut, Inverted Pear, 4mm Ø, HP - HM75FX-040-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Fine, Cross Cut, Inverted Pear, 4mm Ø, HP - HM75FX-040-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Medium, Round End Taper, 7mm Ø, HP - HM75-070-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, Round End Taper, 7mm Ø, HP - HM75-070-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Medium, Round End Taper, 6mm Ø, HP - HM75-060-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, Round End Taper, 6mm Ø, HP - HM75-060-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Fine, Special Toothing for PEEK, 1.4mm Ø, HP - HM73PX-014-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Fine, Special Toothing for PEEK, 1.4mm Ø, HP - HM73PX-014-HP

    Meisinger

    Effective processing of PEEK The new MEISINGER PX Tungsten Carbide Cutters have a fine X-cut, which is distinguished by its optimized cutting angle...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Coarse, Special Toothing for Non-Precious Metal, 1.4mm Ø, HP - HM73MX-014-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Coarse, Special Toothing for Non-Precious Metal, 1.4mm Ø, HP - HM73MX-014-HP

    Meisinger

    Special toothing for non-precious metal alloys, coarse, green ring. Superior durability and sharpness ensures effortless and exceptional cutting D...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Medium, Cross Cut, Small Egg, 2.3mm Ø, HP - HM73MG-023-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, Cross Cut, Small Egg, 2.3mm Ø, HP - HM73MG-023-HP

    Meisinger

    "MINIS" like GX, cross-cut, medium, blue ring, for trimming non-precious alloys and acrylics. Superior durability and sharpness ensures effortless...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Medium, Cross Cut, Small Egg, 1.4mm Ø, HP - HM73MG-014-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, Cross Cut, Small Egg, 1.4mm Ø, HP - HM73MG-014-HP

    Meisinger

    "MINIS" like GX, cross-cut, medium, blue ring, for trimming non-precious alloys and acrylics. Superior durability and sharpness ensures effortless...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Fine, Cross Cut, Small Egg, 1.4mm Ø, HP - HM73MF-014-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Fine, Cross Cut, Small Egg, 1.4mm Ø, HP - HM73MF-014-HP

    Meisinger

    Cross-cut tungsten carbide for trimming large surfaces of non-precious alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Medium, Cross Cut, Egg, 6mm Ø, HP - HM73GX-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Medium, Cross Cut, Egg, 6mm Ø, HP - HM73GX-060-HP

    Meisinger

    Cross-cut, medium, blue ring, for trimming large surfaces of non-precious alloys and acrylics. Superior durability and sharpness ensures effortles...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Medium, Egg, 6mm Ø, HP - HM73-060-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, Egg, 6mm Ø, HP - HM73-060-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Super Coarse, Cross Cut, Barrel, 6mm Ø, HP - HM72SX-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Super Coarse, Cross Cut, Barrel, 6mm Ø, HP - HM72SX-060-HP

    Meisinger

    Cross-cut, super-coarse, black ring, the optimum for acrylic, plaster, and wet plaster. Superior durability and sharpness ensures effortless and...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Meigrit, barrel, 9.5mm, HP - HM72LZ5-095-HP - Avtec Dental
    £33.00 - £33.00
    £33.00
    £33.00 - £33.00
    £33.00

    Carbide Cutter, Meigrit, barrel, 9.5mm, HP - HM72LZ5-095-HP

    Meisinger

    Carbide Type : Non-Sterile Packaged Head Size (mm) : 9.5 Shank Type : HP - Handpiece Shape : MEIGRIT Quantity : 1 Each General Cleani...

    View full details
    £33.00 - £33.00
    £33.00
    £33.00 - £33.00
    £33.00
  • Carbide Cutter, Fine, Cross Cut, Barrel, 6mm Ø, HP - HM72FX-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Fine, Cross Cut, Barrel, 6mm Ø, HP - HM72FX-060-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Faceted Toothing with Cross Cut, Fine, Barrel, 6mm Ø, HP - HM72FS-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Faceted Toothing with Cross Cut, Fine, Barrel, 6mm Ø, HP - HM72FS-060-HP

    Meisinger

    File cut, fine, red ring, highly effective gearing for fast abrasion of hard resins and gypsum. Superior durability and sharpness ensures effortle...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, 1.4 mm, Small, Regular, Rd., HP - HM71MG-014-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, 1.4 mm, Small, Regular, Rd., HP - HM71MG-014-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, 1.4 mm, Fine, X-Cut, Rd., HP - HM71MF-014-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, 1.4 mm, Fine, X-Cut, Rd., HP - HM71MF-014-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Vacuum Form Acrylic Cutter, 2.3mm Ø, HP - HM515-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Vacuum Form Acrylic Cutter, 2.3mm Ø, HP - HM515-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Medium, Pointed X-Mas Tree, 2.3mm Ø, HP - HM489-023-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, Pointed X-Mas Tree, 2.3mm Ø, HP - HM489-023-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Fine, Cross Cut, Thin X-Mas Tree, 1.6mm Ø, HP - HM488FX-016-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Fine, Cross Cut, Thin X-Mas Tree, 1.6mm Ø, HP - HM488FX-016-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, 2.3 mm, Small, Regular, Bevel tip, HP - HM487MG-023-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, 2.3 mm, Small, Regular, Bevel tip, HP - HM487MG-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Medium, Cross Cut, Bevel Tip, 2.3mm Ø, HP - HM487GX-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Medium, Cross Cut, Bevel Tip, 2.3mm Ø, HP - HM487GX-023-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Fine, Cross Cut, Bevel Tip, 2.3mm Ø, HP - HM487FX-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Fine, Cross Cut, Bevel Tip, 2.3mm Ø, HP - HM487FX-023-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Extra Fine, Cross Cut, Bevel Tip, 2.3mm Ø, HP - HM487EX-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Extra Fine, Cross Cut, Bevel Tip, 2.3mm Ø, HP - HM487EX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Coarse, Special Toothing for Titanium, 2.3mm Ø, HP - HM486HT-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Coarse, Special Toothing for Titanium, 2.3mm Ø, HP - HM486HT-023-HP

    Meisinger

    Special toothing for titanium, coarse, green ring, for extensive trimming on titanium and titanium alloys. Superior durability and sharpness ensur...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Medium, Cross Cut, Round End, 2.3mm Ø, HP - HM486GX-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Medium, Cross Cut, Round End, 2.3mm Ø, HP - HM486GX-023-HP

    Meisinger

    Cross-cut, medium, blue ring, for trimming large surfaces of non-precious alloys and acrylics. Superior durability and sharpness ensures effortles...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Medium, Special Toothing for Titanium, 2.3mm Ø, HP - HM486GT-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Medium, Special Toothing for Titanium, 2.3mm Ø, HP - HM486GT-023-HP

    Meisinger

    Special toothing for titanium, medium, blue ring, for speedy work on titanium and titanium alloys. Superior durability and sharpness ensures effor...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Fine, Cross Cut, Round End, 2.3mm Ø, HP - HM486FX-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Fine, Cross Cut, Round End, 2.3mm Ø, HP - HM486FX-023-HP

    Meisinger

    Special toothing for titanium, fine, red ring, for fine, difficult work on titanium and titanium alloys. Superior durability and sharpness ensures...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Fine, Special Toothing for Titanium, 2.3mm Ø, HP - HM486FT-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Fine, Special Toothing for Titanium, 2.3mm Ø, HP - HM486FT-023-HP

    Meisinger

    Special toothing for titanium, fine, red ring, for fine, difficult work on titanium and titanium alloys. Superior durability and sharpness ensures...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Extra Fine, Special Toothing for Titanium, 2.3mm Ø, HP - HM486ET-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Extra Fine, Special Toothing for Titanium, 2.3mm Ø, HP - HM486ET-023-HP

    Meisinger

    Special toothing for titanium, extra-fine, yellow ring, for extra-fine, difficult work on titanium and titanium alloys. Superior durability and sh...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Medium, Cross-Cut, Flat End Cylinder, 6mm, HP - HM460GX-023-HP - Avtec Dental
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00

    Carbide Cutter, Medium, Cross-Cut, Flat End Cylinder, 6mm, HP - HM460GX-023-HP

    Meisinger

    Cross-cut, medium, blue ring, for trimming large surfaces of non-precious alloys and acrylics. Superior durability and sharpness ensures effortles...

    View full details
    £27.00 - £27.00
    £27.00
    £27.00 - £27.00
    £27.00
  • Carbide Cutter, Medium, Cross Cut, X-mas Tree, 6mm Ø, HP - HM416GX-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Medium, Cross Cut, X-mas Tree, 6mm Ø, HP - HM416GX-060-HP

    Meisinger

    Cross-cut, medium, blue ring, for trimming large surfaces of non-precious alloys and acrylics. Superior durability and sharpness ensures effortles...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Carbide Cutter, Medium, X-mas Tree, 6mm Ø, HP - HM416-060-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, X-mas Tree, 6mm Ø, HP - HM416-060-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Abrasive, White, Tapered Round End, Arkansas, 2.3mm Ø, Extra Fine, FG - 619XF-023-FG-WH - Avtec Dental
    £37.00 - £37.00
    £37.00
    £37.00 - £37.00
    £37.00

    Carbide Cutter, 1.0 mm, Long, X-Cut Fissure, Round end HPL - HM31LR-010-HPL

    Meisinger

    Carbide Type : Non-Sterile Packaged Head Size (mm) : 1 Shape : Cylinder, Round End Quantity : 1 Each Working Length (mm) : 12

    £37.00 - £37.00
    £37.00
    £37.00 - £37.00
    £37.00
  • Carbide Cutter, Medium, Inverted Cone, 2.3mm, HP - HM30MG-023-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Medium, Inverted Cone, 2.3mm, HP - HM30MG-023-HP

    Meisinger

    "MINIS" like FX, cross-cut, fine, red ring, for fine and accurate trimming of hard alloys and acrylics. Superior durability and sharpness ensures ...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Fine, Inverted Cone, 2.3mm Ø, HP - HM30MF-023-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Fine, Inverted Cone, 2.3mm Ø, HP - HM30MF-023-HP

    Meisinger

    "MINIS" like FX, cross-cut, fine, red ring, for fine and accurate trimming of hard alloys and acrylics. Superior durability and sharpness ensures ...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Fine, Inverted Cone, 1.4mm Ø, HP - HM30MF-014-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Fine, Inverted Cone, 1.4mm Ø, HP - HM30MF-014-HP

    Meisinger

    "MINIS" like FX, cross-cut, fine, red ring, for fine and accurate trimming of hard alloys and acrylics. Superior durability and sharpness ensures ...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, 3-Sided Point, Lab Carbide Cutter, 1.2mm Ø, HP - HM280-012-HP - Avtec Dental
    £26.00 - £26.00
    £26.00
    £26.00 - £26.00
    £26.00

    Carbide Cutter, 3-Sided Point, Lab Carbide Cutter, 1.2mm Ø, HP - HM280-012-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    £26.00 - £26.00
    £26.00
    £26.00 - £26.00
    £26.00
  • Abrasive, White, Tapered Round End, Arkansas, 2.3mm Ø, Extra Fine, FG - 619XF-023-FG-WH - Avtec Dental
    £41.00 - £41.00
    £41.00
    £41.00 - £41.00
    £41.00

    Carbide Cutter, 1.4 mm, Rd End Taper, Finishing, HP - HM274-014-HP

    Meisinger

    MEISINGER's Carbides are defined by their superior construction and ability to consistently yield precise results. Their remarkable strength and en...

    View full details
    £41.00 - £41.00
    £41.00
    £41.00 - £41.00
    £41.00
  • Carbide Cutter, Fine, Special toothing for PEEK, Round End Taper, 2.3mm Ø, HP - HM261PX-023-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Fine, Special toothing for PEEK, Round End Taper, 2.3mm Ø, HP - HM261PX-023-HP

    Meisinger

    Effective processing of PEEK The new MEISINGER PX Tungsten Carbide Cutters have a fine X-cut, which is distinguished by its optimized cutting angle...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Coarse, Special Toothing for Non-Precious Metal Alloys, Round End Taper, 2.3mm Ø, HP - HM261MX-023-HP - Avtec Dental
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00

    Carbide Cutter, Coarse, Special Toothing for Non-Precious Metal Alloys, Round End Taper, 2.3mm Ø, HP - HM261MX-023-HP

    Meisinger

    Special toothing for non-precious metal alloys, coarse, green ring. Superior durability and sharpness ensures effortless and exceptional cutting D...

    View full details
    £25.00 - £25.00
    £25.00
    £25.00 - £25.00
    £25.00
  • Carbide Cutter, Meigrit, Taper, 6mm Ø, HP - HM251Z5-HP-060 - Avtec Dental
    £33.00 - £33.00
    £33.00
    £33.00 - £33.00
    £33.00

    Carbide Cutter, Meigrit, Taper, 6mm Ø, HP - HM251Z5-HP-060

    Meisinger

    Designed For: Soft Lining Matt Carbide Type : Non-Sterile Packaged Head Size (mm) : 6 Shank Type : HP - Handpiece Shape : Egg, Football Q...

    View full details
    £33.00 - £33.00
    £33.00
    £33.00 - £33.00
    £33.00
  • Carbide Cutter, Super Coarse, Special Toothing for Titanium, 6mm Ø, HP - HM251ST-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Carbide Cutter, Super Coarse, Special Toothing for Titanium, 6mm Ø, HP - HM251ST-060-HP

    Meisinger

    Special toothing for titanium, super-coarse, for fast effective work on titanium and titanium alloys. Superior durability and sharpness ensures ef...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00
  • Lab Bur for Thermoplastic, Medium, QX 6.0 - HM251QX-060-HP - Avtec Dental
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00

    Lab Bur for Thermoplastic, Medium, QX 6.0 - HM251QX-060-HP

    Meisinger

    Special toothing for the processing of thermoplastic materials, blue ring, for the finishing of rails. Superior durability and sharpness ensures e...

    View full details
    £28.00 - £28.00
    £28.00
    £28.00 - £28.00
    £28.00