DCI

Button Assy, Locking, to fit A-dec AVS Vacuum Valves Fits AVS Vacuum Valves OEM part numbers: A-dec 10-0110-00A-dec 10-0600-00A-dec 10.0110.00A-...

Stem, w/O-Rings, Water Coolant Valve, to fit A-dec Auto-Pac & Auto Block; Pkg of 3 Package of 3 Stem w/ o-ring  OEM part numbers: A-dec 22....

Replacement for A-dec Auto-Pac & Auto Block, Air Valve, Service Kit OEM part numbers: A-dec 90.0012.00A-dec 90-0012-00RPI ADK095

Replacement for A-dec Auto-Pac & Auto Block, Air Coolant Valve Stem OEM part numbers: A-dec 22-0999-00A-dec 22.0999.00RPI ADS093

Repair Kit, Autoclavable SE OEM part number: Pelton & Crane 3324816

Repair Kit, A-dec Style SE   Manufactured By: DCI International

Relief Valve, Midmark/Ritter M9 & M11, Pelton & Crane OCM & OCR (Midmark #002-0359-00) (Pelton & Crane #004146)  1/2" NPT Brass p...

Relief Valve, 165 PSI ASME certified Relieves pressure 165 PSI 1/4" MPT Prevents damage to filter indicators Fits DCI & Tech West compressor ...

Regulator Mounting Bracket w/ Nut  Air Filter / Regulator "Brass"Air Filter Regulator "Coated Aluminum" Mounting bracket (7223) For use with air ...

Recharge Kit For 2541, Dual Tank, Blue Silica gel desiccant Removes moisture from air

Recharge Kit For 2501, Single Tank, Brown Kit contains 5 lbs silica gel desiccant Removes moisture from air OEM part number: MDT/Castle 3-08-080...

Rear Ported Valve, 3-Way, Gray Positive on/off control Panel-mounting 15/32-32 thread with nut 3-way for air only OEM part numbers: A-dec 33.008...

Rear Ported Valve, 3-Way, Black Positive on/off control Panel-mounting 15/32-32 thread with nut 3-way for air only Rear ports OEM part numbers: ...

Mobil oil 1 - 15W50, fully synthetic Case of 6 "DentalEZ" and "RAMVAC" are registered trademarks of DentalEZ, Inc., and RAMVAC Dental Products,...

RAMVAC Vacuum Pump Oil, 1 Quart Mobil oil 1 - 15W50, fully synthetic "DentalEZ" and "RAMVAC" are registered trademarks of DentalEZ, Inc., and R...

RAMVAC V-Type Drive Belt, 002164/42", Bison 5 V type belt Original OEM replacement "DentalEZ" and "RAMVAC" are registered trademarks of DentalEZ,...

RAMVAC V-Type Drive Belt, 002163/41", Bison 3 & 9 V-type belt  Original OEM replacement "DentalEZ" and "RAMVAC" are registered trademarks of ...

RAMVAC Cogged-Type Belt, 670 mm, Bulldog 855 w/ 815 RPM Cogged type belt Original OEM replacement "DentalEZ" and "RAMVAC" are registered trademar...

Pressure Switch, Unloading for Single Head Compressors Starts and stops compressor motors OEM part numbers: Apollo ECS10450MDT/Castle 3-08-0111-1...

Pressure Switch, Unloading for Dual & Triple Head Compressors Starts and stops compressor motors OEM part numbers: Apollo ECS10455MDT/Castle ...

Pressure Switch, Non-unloading For Dual Compressors Starts and stops compressor motors OEM part number: RPI cms053

Pressure Gauge, Round, 0-100 PSI 0-100 PSI gauge 

Post, Light, 30" x 2" OD, Stainless Steel 2" Diameter Post painted with a scratch resistant powder coat finish

Post, Light,  24" x 2" OD, White 2" Diameter Post painted with a scratch resistant powder coat finish

Post, Light,  24" x 2" OD, Stainless Steel 2" Diameter Post painted with a scratch resistant powder coat finish OEM part number: Forest Dental 11...

Post Top Mount, 2", White For mounting folding and telescoping arm assemblies Accepts 1/2" O.D. pin White scratch resistant powder coat finish ...

Post Top Mount, 2", Gray For mounting folding and telescoping arm assemblies Accepts 1/2" O.D. pin Gray scratch resistant powder coat finish Fi...

Post Cap, 2" w/O-Ring, Stainless Steel Use with Light Posts 2" Diameter OEM part numbers: Beaverstate Dental 010-059Forest Dental 0010-140

Post Cap, 2" w/O-Ring, Gray Use with Light Posts 2" Diameter

Pilot Actuated Relay Valve, Normally Open Requires actuator #7096 10-32 ports 2-way (non-relieving) For air or water

Pig Tail, Insulated, 8-10 AWG Package of 10  OEM part number: RPI RPT014

Pig Tail, Insulated, 22-14 AWG Package of 20  OEM part number: RPI RPT013

P-Series Portable Lubricated Air Compressor 1 User/1/2 HP/ Single Head/ .93 Gallon Tank/ 115 Vac 1 User / 1/2 HP / Single Head / .93 Gal Tank / 11...

Outlet Tubing 30" L x 1/2" O.D. x 1/4" I.D. For use with DCI PN 2538, nasal hood outlet vacuum connector OEM part number: MDT/Castle 3-71-0896-10

O-Ring, Viton, .438 I.D. X .110 Width Material - Viton I.D. x Cross Section - .438 x .110 Package of 12

O-Ring, Viton, .323 I.D. X .035 Width Material - Viton I.D. x Cross Section - .323 x .035 Package of 12

O-Ring, Viton, .300 I.D. X .050 Width Material - Viton I.D. x Cross Section - .300 x .050 Package of 12 

O-Ring, Viton, .176 I.D. X .066 Width Material - Viton I.D. x Cross Section - .176 x .066 Package of 12

O-Ring, Viton, .136 I.D. X .040 Width Material - Viton I.D. x Cross Section - .136 x .040 Package of 12

O-Ring, Viton, .129 I.D. X .050 Width Material - Viton I.D. x Cross Section - .129 x .050 Package of 12

O-Ring, Buna-n, .144 I.D. X .025 Width Material - Buna-n I.D. x Cross Section - .144 x .025 Package of 12  

O-Ring, Buna-n, .065 I.D. X .035 Width Material - Buna-n I.D. x Cross Section - .065 x .035 Package of 12