External-Lift-Control Kit, External Sinus Lift System - BTL00

The External-Lift-Control is a system for the easy performance of a complete external sinus lift. After gaining lateral access through the facial wall of the maxillary sinus, the practitioner detaches the Schneiderian membrane using the various hand-held instruments and lifts the membrane cranially from the floor of the sinus. Then, a suitable augmentation material can be inserted under the membrane.

To Be Used On : Surgery

Kit Contents

Diamond Burs

242-030-070 - Extra Fine, Length = 0.3mm, Ext. Ø = 10.0mm, RA
242-040-070 - Extra Fine, Length = 0.3mm, Ext. Ø = 13.0mm, RA

Elevators

SL25 - Sinus Lift, Length = 16.0mm, Ext. Ø = 2.5mm
SL30 - Sinus Lift, Length = 16.0mm, Ext. Ø = 3.0mm
SL35 - Sinus Lift, Length = 16.0mm, Ext. Ø = 3.5mm
SL40 - Sinus Lift, Length = 16.0mm, Ext. Ø = 4.0mm
SL45 - Sinus Lift, Length = 16.0mm, Ext. Ø = 4.5mm
SL50 - Sinus Lift, Length = 16.0mm, Ext. Ø = 4.5mm

Expansion Burs

B2004 - Blue/Green, Expansion Drill, Length = 12.0mm, Ext. Ø = 2.7mm, RAL
E2004 - Red/Blue, Expansion Drill, Length = 12.0mm, Ext. Ø = 3.4mm, RAL
F2004 - Red/Blue, Expansion Drill, Length = 12.0mm, Ext. Ø = 3.9mm, RAL
G2004 - Purple/Green, Expansion Drill, Length = 11.0mm, Ext. Ø = 4.5mm, RAL
H2004 - Red/Green, Expansion Drill, Length = 11.0mm, Ext. Ø = 4.9mm, RAL

Impact Tool

SL0 - Length = 100.0mm

Pilot Burs

B2001 - Length = 15.0mm, Ext. Ø = 1.6mm, RAL
G2001 - Length = 11.0mm, Ext. Ø = 3.4mm, RAL

Steel Burs

186RF-018-RA - Initial Bur, Length = 12.0mm, Ext. Ø = 1.8mm, RA

Hand Instruments

TL1 - Sinus Lift, Carbocer Coated, Length = 173.0mm
TL2 - Sinus Lift, Carbocer Coated, Length = 173.0mm
TL3 - Sinus Lift, Carbocer Coated, Length = 172.0mm
TL8 - Sinus Lift, Carbocer Coated, Length = 181.0mm
TL19 - Sinus Lift, Carbocer Coated, Length = 182.0mm
TL20 - Sinus Lift, Carbocer Coated, Length = 160.0mm

Optionally Available:

HI070 - Teflon Coated Mallet, Length = 195.0mm
SL1 - Impact Tool, Length = 133.0mm

Made in Germany