Products

Cooling Fan Assembly Finger Guard (MDT #3-08-0399-10) Fan Cover OEM part number: MDT/Castle 3-08-0399-10  

Cooling Fan Assembly, 115 Volt (MDT #3-08-0578-10) Cools compressor heads Cools sound covers 105 cfm OEM part numbers: Apollo SEA95535Chapman-Hu...

Cooling Fan Assembly, 230 Volt (MDT #3-08-0563-10) Cools compressor heads Cools sound covers 105 cfm OEM part numbers: Apollo SEA95540Chapman-Hu...

Copeland Capacitor/Relay Control, 1 HP, 115 Volt (MDT #3-08-023-07) Original Copeland Component 1 HP Prewired and Tested 115 Volt AC OEM part nu...

Copeland Capacitor/Relay Control, 1 HP, 230 Volt (MDT #3-08-0234-07) Original Copeland Component 1 HP Prewired and Tested 230 Volt AC OEM part n...

Copeland Intake Filter Assembly (MDT #3-08-0703-20S) Filters intake air to 40 microns Extends service life of the compressor Reduces noise OEM p...

Copeland Intake Filter, Element Only (MDT #3-08-0632-10) Filters intake air to 40 microns Extends service life of the compressor Reduces noise O...

Copeland Oil Filler/Breather Filter (MDT #301876) Reduces crankcase oil foaming OEM part numbers: Midmark 77005088Apollo MMS50950MDT/Castle 3018...

Copeland Sight Glass    (MDT #3-08-0092-10) Original Copeland Component Requires DCI tool 2633 Replaces damaged sight glass OEM part numbers: MD...

Copeland Sight Glass Kit Original Copeland Component Requires DCI tool 2633 Replaces damaged sight glass OEM part numbers: Midmark 77000812Apoll...

Copeland Thermal Protector, 1 HP, 230 Volt (MDT #3-08-0229-10) Original Copeland Component 230 Volt AC 1 HP OEM part numbers: Apollo HCA30615MDT...

Copeland Thermal Protector, 3/4 HP, 230 Volt (MDT #3-08-0231-10) Original Copeland Component 230 Volt AC 3/4 HP OEM part numbers: Apollo HCA3060...

The Cordless Dental Lab Motor is the perfect solution for simple portable dentistry. Made to be mobile, this lab motor allows you to perform light-...

Cordless Prophygiene E200 Handpiece - Compact & Simple to Use - Utilizes your office Foot Pedal without modification. Features: No modificati...

Corn Suture Forceps, Serrated, 45 Degrees, 160mm 45 degree serrated open tips Open tip design used for suturing 160mm Made of surgical stainl...

Corrugated Breathing Tube (MDT #3-70-0389-10) OEM part number: MDT/Castle 3-70-0389-10

Counter Top Mounted HVE, Chrome Bezel For mounting HVE in the top of a cabinet (sterilization, lab) Includes colored bezel, premium HVE valve, tub...

Counter Top Mounted HVE, Nickel Bezel  (image shown is of chrome bezel) For mounting HVE in the top of a cabinet (sterilization, lab) Includes col...

Cover w/Screws Only, Control Block, to fit A-dec Century II OEM part numbers: A-dec 38.0178.00A-dec 38-0178-00

CPU Vent Cut out dimension 4 1/4" x 3 1/4"  Adds ventilation to CPU cabinets and sterilization cabinets A-dec OEM #042.583.00 OEM part number: A-...

CPYK Cord Packer Made of stainless steel Angled tips Tip size: 2mm

Crest-Control is a horizontal bone splitting system which allows for a predetermined and minimally invasive widening of the horizontally resorbed a...

Crestal Approach Aqua Lift Expander Screws Used to raise the sinus membrane during a crestal sinus lift Expanders thread into an osteotomy like an...

Crestal Sinus Lift Reamers Used to access the sinus membrane Fluted design helps prevent damage to the sinus membrane Diameters: 2.8, 3.3, 3.7mm ...

Crestal-Lift-Control Basic is a system for the performance of an easy and safe internal sinus lift. The elevation of the Schneiderian membrane occu...

Replacement Crestal Drills for the Hydraulic Sinus Master. Diameter sizes available - 2.0mm, 2.5mm. 2.8mm, 3.3mm, 3.8mm, 4.2mm

Hollow sinus membrane elevator Reference Number: 03920001

Hollow sinus membrane elevator, used in cases of an inadequate mineralized bone or overpreparation. Reference Number: 03920002  

Crestal-Lift-Control is a system for the performance of an easy and safe internal sinus lift. The elevation of the Schneiderian membrane occurs dur...

Crilewood Needle Holder, Straight, TC, 150mm Straight tip Tungsten carbide increases tip longevity and grip 150mm in length Made of surgical ...

Cross Connector, 10-32 Male x 10-32 Female (3)

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These den...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

Carbide Type : Non-Sterile Packaged Head Size (mm) : 1 Shank Type : FG - Friction Grip Shape : Cylinder, Round End Quantity : 5 Pack ...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

MEISINGER's Metal Cutting Carbides are manufactured for smooth and efficient cutting of metal restorations, including crowns and bridges. These de...

Crown Lengthening and Grafting Kit The Crown Lengthening and Grafting Kit is used for crown lengthening and basic bone grafting procedures. Special...

Preparation and finishing of subgingival margins Cutting Action: micro-smoothening Clinical Application: ultrasonic finishing of the cervical m...

Preparation and finishing of subgingival crown margins Function: micro-smoothing Application: Preparation and finishing of subgingival crown ma...

OTA Crown Pullers are made of stainless steel and are supplied with replacement pads and emery powder.

Replacement Pads (pack of 20 each) for OTA Crown Puller

To Be Used On : Crown Removal Kit Contents Carbides HM17-010-FG - (x4) US# 1931, Cylinder, Ø = 1.0mm, FGHM17-012-FG - (x4) US# 1932, Cylinder, ...

This Crown Remover handpiece uses the power and control of the Magnetic Dynamic technology to develop a perfectly longitudinal traction that allows...