RAM Products

RAM Oz Plus Features Digital RPM display (0-50K) Brushless Micromotor Variable speed control dial Speed safety dial lock (40K-50K) Self diagnosi...

NextGen Series   Features Speeds ranging from 2,000 to 40,000 RPM Straight cord for easy mobility Heavy duty industrial grade ball baearings I...

  RAM Oz Plus Features High power 7.8 Ncm torque (230 Watts) Ultra quiet Constant torque + constant speed Super torque even at low speed Sea...

35,000 RPM Twist type chuck release Easy to change chucks Improved dust seal protection Heavy duty front bearings   

 Features Quick release feature Heavy duty 900 gf.cm torque

  NextGen Series    Features Speeds ranging from 2,000 to 40,000 RPM Straight cord for easy mobility Heavy duty industrial grade ball baearings...

  RAM Oz Plus Features Digital RPM display (0-50K) Variable speed control dial Speed safety dial lock (40K-50K) Self diagnosis start up Erro...

  Features Allows user to vary speed Foot pedal only      

  RAM Oz Plus Features Can be placed on floor or side mount Soft touch control Handpiece only  

On/Off Foot Pedal 6 Pin Din  This On/Off foot pedal accessory will allow the control box to turn on and off only at the speed dial setting

 Ram 45 Bearing Set w/ C Clip

CHUCK FEATURES: 1/8" Chuck for Optimus, OZ Plus Handpieces If you use one size quite often then it would be better to change the collet chuck s...

CHUCK FEATURES: 1/8" Chuck for TECH 2000 and 45000 Handpieces If you use one size quite often then it would be better to change the collet chuc...

CHUCK FEATURES: 1/8" Chuck for TECH 2000/45000/OPTIMUS and Primus Handpieces If you use one size quite often then it would be better to change th...

ADAPTER FEATURES: Adapter 1/8” to 1/16” (FG) Handy 3/32” Shaft with a Knurled Ring to Tighten and Lock the Tiny (FG = Friction Grip 1/16” or 1.6...

BALL BEARING FEATURES:  1040ZZ Motor Bearing  Stainless Steel  High Quality

BALL BEARING FEATURES: 1260ZZ Ball Bearing for TECH 2000, 45000 and SLIM NOSE Handpieces

BALL BEARING FEATURES: 1480ZZ Ball Bearing for TECH 2000 and SLIM NOSE Handpieces

BALL BEARING FEATURES: 188ZZ Ball Bearing for F/NEXTGEN/OPTIMUS/OZ Handpieces 6.35mm x 12.7mm x 4.8mm 

1:1 FG CONTRA ANGLE FRICTION FIT HANDPIECE FEATURES: High Durability by Using Corrosion-resistant Bearings Easy to Clean and Lubricate Ergonomic D...

Saeyang Ki-AG20L 20:1 IMPLANT OPTIC ANGLE HANDPIECE FEATURES: Stainless Steel Body Double Sealing System Saeyang Ki-AG20L 20:1 IMPLANT OPTIC AN...

3 COMPARTMENT WAX HEATER FEATURES:  3 Compartments  Temperature: 100~285°F Cast iron with hinged cover, 3 compartments, dial thermostat for preci...

CHUCK FEATURES:  3/32" Chuck for Optimus, OZ Plus Handpieces  If you use one size quite often then it would be better to change the collet chuck s...

CHUCK FEATURES: 3/32" Chuck for TECH 2000 Handpieces If you use one size quite often then it would be better to change the collet chuck sizes w...

CHUCK FEATURES: 3/32" Chuck for TECH 2000/45000/ Optimus and Primus Handpieces If you use one size quite often then it would be better to change ...

32:1 IMPLANT OPTIC ANGLE HANDPIECE FEATURES: Stainless Steel Body Double Sealing System 32:1 IMPLANT OPTIC ANGLE HANDPIECE SPECIFICATIONS: Max T...

CHUCK FEATURES: 3mm Chuck for TECH 2000 and 45000 Handpieces If you use one size quite often then it would be better to change the collet chu...

45000 HANDPIECE FEATURES:  45,000 RPM  Twist Type Release  Multi-Chuck (Easy to Change Chucks)  Improved Dust Seals  Grease Sealed Bearings  Optio...

PRIMUS 45 HANDPIECE FEATURES: 45,000 RPM Similar with U-Power UG33 in Design 3 Heavy-duty Bearings in Front - Improves Durability Superior to Othe...

BALL BEARING FEATURES:  830ZZ Rear Motor Ball Bearing for TECH 2000, 45000 and SLIM NOSE Handpieces 3mm x 8mm x 3mm