Skip to content

Meisinger

  • Carbide Cutter, Medium, Q-Cut, Taper, 6mm Ø, HP - HM251Q-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Medium, Q-Cut, Taper, 6mm Ø, HP - HM251Q-060-HP

    Meisinger

    Cross-cut, medium, blue ring, for effective and smooth trimming on all prothesis and surgical acrylics. Superior durability and sharpness ensures ...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Coarse, Special Toothing for Non-Precious Metal Alloys, Taper, 6mm Ø, HP - HM251MX-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Coarse, Special Toothing for Non-Precious Metal Alloys, Taper, 6mm Ø, HP - HM251MX-060-HP

    Meisinger

    Special toothing for non-precious metal alloys, coarse, green ring. Superior durability and sharpness ensures effortless and exceptional cutting D...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Coarse, Taper, 6mm Ø, HP - HM251HX-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Coarse, Taper, 6mm Ø, HP - HM251HX-060-HP

    Meisinger

    Cross-cut, coarse, green ring, for trimming large surfaces of acrylics, tray materials, and plaster. Superior durability and sharpness ensures eff...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Coarse, Faceted Toothing with Cross Cut, Lab Carbide Cutter, 6mm Ø, HP - HM251GF-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Coarse, Faceted Toothing with Cross Cut, Lab Carbide Cutter, 6mm Ø, HP - HM251GF-060-HP

    Meisinger

    Faceted toothing with cross-cut, coarse, orange/green rings, for work on acrylic, permanent soft acrylics, and hard plaster. Superior durability a...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Coarse, Taper, 6mm Ø, HP - HM251G-060-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Coarse, Taper, 6mm Ø, HP - HM251G-060-HP

    Meisinger

    Plain cut, coarse, green ring, for rapid and effective trimming of acrylics and plaster. Superior durability and sharpness ensures effortless and ...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Fine, Taper, 4mm Ø, HP - HM251FX-040-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Fine, Taper, 4mm Ø, HP - HM251FX-040-HP

    Meisinger

    Cross-cut, fine, red ring, for fine trimming on all alloys and hard acrylics. Superior durability and sharpness ensures effortless and exceptional...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Fine, File Cut, 6mm Ø, HP - HM251FS-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Fine, File Cut, 6mm Ø, HP - HM251FS-060-HP

    Meisinger

    Cross-cut, fine, red ring, for fine trimming on all alloys and hard acrylics. Superior durability and sharpness ensures effortless and exceptional...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Fine, Q-Cut, Taper, 6mm Ø, HP - HM251FQ-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Fine, Q-Cut, Taper, 6mm Ø, HP - HM251FQ-060-HP

    Meisinger

    Cross-cut, fine, red ring, for fine trimming on all alloys and hard acrylics. Superior durability and sharpness ensures effortless and exceptional...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Fine, Round End Taper, 6mm Ø, HP - HM251FF-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Fine, Round End Taper, 6mm Ø, HP - HM251FF-060-HP

    Meisinger

    Faceted toothing with cross-cut, fine, orange/blue rings, for fine work on acrylics, permanent soft acrylics, and hard plaster. Superior durabilit...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Fine, Faceted toothing with Cross Cut, 4mm Ø, HP - HM251FF-040-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Fine, Faceted toothing with Cross Cut, 4mm Ø, HP - HM251FF-040-HP

    Meisinger

    Faceted toothing with cross-cut, fine, orange/blue rings, for fine work on acrylics, permanent soft acrylics, and hard plaster. Superior durabilit...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Medium, Double-Right Gearing,, 6mm Ø, HP - HM251DG-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Medium, Double-Right Gearing,, 6mm Ø, HP - HM251DG-060-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Fine, Double-Right Gearing, 6mm Ø, HP - HM251DF-060-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Fine, Double-Right Gearing, 6mm Ø, HP - HM251DF-060-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Medium, Round End, Acrylic, Taper, 7mm Ø, HP - HM251-070-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Medium, Round End, Acrylic, Taper, 7mm Ø, HP - HM251-070-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Super Coarse, Round End, Special toothing for titanium, 4.0mm, HP - HM250ST-040-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Super Coarse, Round End, Special toothing for titanium, 4.0mm, HP - HM250ST-040-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Medium, Cross Cut, Round End, Acrylic, Taper, 4mm Ø, HP - HM250GX-040-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Medium, Cross Cut, Round End, Acrylic, Taper, 4mm Ø, HP - HM250GX-040-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Medium, Round End, Taper, 4mm Ø, HP - HM250FX-040-HP - Avtec Dental
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00

    Carbide Cutter, Medium, Round End, Taper, 4mm Ø, HP - HM250FX-040-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    $53.00 - $53.00
    $53.00
    $53.00 - $53.00
    $53.00
  • Carbide Cutter, Medium, Taper, 1.4mm Ø, HP - HM23MG-014-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Medium, Taper, 1.4mm Ø, HP - HM23MG-014-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Fine, Taper, 1.4mm Ø, HP - HM23MF-014-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Fine, Taper, 1.4mm Ø, HP - HM23MF-014-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Medium, Long, Round end, Taper 2.3mm, HP - HM23LR-023-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Medium, Long, Round end, Taper 2.3mm, HP - HM23LR-023-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Medium, Cross Cut, Taper, 2.3mm Ø, HP - HM23GX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Medium, Cross Cut, Taper, 2.3mm Ø, HP - HM23GX-023-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Fine, Cross Cut, Taper, 2.3mm Ø, HP - HM23FX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Fine, Cross Cut, Taper, 2.3mm Ø, HP - HM23FX-023-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Fine, Q-Cut, Taper, 2.3mm Ø, HP - HM23FQ-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Fine, Q-Cut, Taper, 2.3mm Ø, HP - HM23FQ-023-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Medium, Cylinder, 6mm Ø, HP - HM21-060-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Medium, Cylinder, 6mm Ø, HP - HM21-060-HP

    Meisinger

    Plain cut, medium, blue ring, for effective trimming of hard materials and for obtaining especially smooth surfaces. Superior durability and sharp...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, PEEK, Round Bevel Tip, 2.3mm Ø, Fine, HP - HM139PX-023-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, PEEK, Round Bevel Tip, 2.3mm Ø, Fine, HP - HM139PX-023-HP

    Meisinger

    Effective processing of PEEK The new MEISINGER PX Tungsten Carbide Cutters have a fine X-cut, which is distinguished by its optimized cutting angle...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Cross Cut, Bevel Tip, 2.3mm Ø, Medium, HP - HM139GX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Cross Cut, Bevel Tip, 2.3mm Ø, Medium, HP - HM139GX-023-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Cross Cut, Bevel Tip, 2.3mm Ø, Fine, HP - HM139FX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Cross Cut, Bevel Tip, 2.3mm Ø, Fine, HP - HM139FX-023-HP

    Meisinger

    Cross-cut, fine, red ring, for delicate and difficult trimming of hard alloys and acrylics. Superior durability and sharpness ensures effortless a...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, PEEK, Round End Cylinder, 2.3mm Ø, Fine, HP - HM138PX-023-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, PEEK, Round End Cylinder, 2.3mm Ø, Fine, HP - HM138PX-023-HP

    Meisinger

    Effective processing of PEEK The new MEISINGER PX Tungsten Carbide Cutters have a fine X-cut, which is distinguished by its optimized cutting angle...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Special Toothing for Non-Precious Metal Alloys, Round End Taper, 2.3mm Ø, Coarse, HP - HM138MX-023-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Special Toothing for Non-Precious Metal Alloys, Round End Taper, 2.3mm Ø, Coarse, HP - HM138MX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Cross Cut, Round End Taper, 2.3mm Ø, Medium, HP - HM138GX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Cross Cut, Round End Taper, 2.3mm Ø, Medium, HP - HM138GX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Cross Cut, Round End Taper, 2.3mm Ø, Fine, HP - HM138FX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Cross Cut, Round End Taper, 2.3mm Ø, Fine, HP - HM138FX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Cross Cut, Round End Taper, 2.3mm Ø, Fine, HP - HM138FQ-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Cross Cut, Round End Taper, 2.3mm Ø, Fine, HP - HM138FQ-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Fine, PEEK, Round End Cylinder, 2.3mm Ø, HP - HM129PX-023-HP - Avtec Dental
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00

    Carbide Cutter, Fine, PEEK, Round End Cylinder, 2.3mm Ø, HP - HM129PX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $47.00 - $47.00
    $47.00
    $47.00 - $47.00
    $47.00
  • Carbide Cutter, Medium, Cross Cut Round End Cylinder, 2.3mm Ø, HP - HM129GX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Medium, Cross Cut Round End Cylinder, 2.3mm Ø, HP - HM129GX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Fine, Cross Cut, Round End Cylinder, 2.3mm Ø, HP - HM129FX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Fine, Cross Cut, Round End Cylinder, 2.3mm Ø, HP - HM129FX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Carbide Cutter, Extra Fine, Cross Cut, Round End Cylinder, 2.3mm Ø, HP - HM129EX-023-HP - Avtec Dental
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00

    Carbide Cutter, Extra Fine, Cross Cut, Round End Cylinder, 2.3mm Ø, HP - HM129EX-023-HP

    Meisinger

    MEISINGER Lab Carbides are specially suitable for permanent acrylics, acrylic, and gypsum material. Ample chip spaces allow for the expulsion of ma...

    View full details
    $51.00 - $51.00
    $51.00
    $51.00 - $51.00
    $51.00
  • Elite Series II, E-Type Contra Angle Attachment, FG - MEAFG - Avtec Dental
    $266.00 - $266.00
    $266.00
    $266.00 - $266.00
    $266.00

    Elite Series II, E-Type Contra Angle Attachment, FG - MEAFG

    Meisinger

    MEISINGER’s Elite Series ll, E-Type Contra Angle Attachment accepts all FG (friction grip) instruments. Fits on all ISO E-type motors. Accepts all...

    View full details
    $266.00 - $266.00
    $266.00
    $266.00 - $266.00
    $266.00
  • Elite Series II, Portable Handpiece Kit - MHP02 - Avtec Dental
    $754.00 - $754.00
    $754.00
    $754.00 - $754.00
    $754.00

    Elite Series II, Portable Handpiece Kit - MHP02

    Meisinger

    MEISINGER’s Elite Series ll Portable Handpiece includes a durable control unit with a long-lasting lithium battery and a straight handpiece that ac...

    View full details
    $754.00 - $754.00
    $754.00
    $754.00 - $754.00
    $754.00
  • Luster Paste, (Fine), 2g Syringe - DPS2 - Avtec Dental
    $81.00 - $81.00
    $81.00
    $81.00 - $81.00
    $81.00

    Luster Paste, (Fine), 2g Syringe - DPS2

    Meisinger

    The MEISINGER LUSTER® paste is a 1-step diamond polishing paste used for high-gloss polishing of dental ceramic materials.

    $81.00 - $81.00
    $81.00
    $81.00 - $81.00
    $81.00
  • Luster Paste, (Medium), 3g Container - DP4 - Avtec Dental
    $103.00 - $103.00
    $103.00
    $103.00 - $103.00
    $103.00

    Luster Paste, (Medium), 3g Container - DP4

    Meisinger

    The MEISINGER LUSTER® paste is a 1-step diamond polishing paste used for high-gloss polishing of dental ceramic materials. Luster Paste Flyer ...

    View full details
    $103.00 - $103.00
    $103.00
    $103.00 - $103.00
    $103.00
  • Luster Paste, (Medium), 3g Container - DP4 - Avtec Dental
    $103.00 - $103.00
    $103.00
    $103.00 - $103.00
    $103.00

    Luster Paste, (Fine), 3g Container - DP2

    Meisinger

    The MEISINGER LUSTER® paste is a 1-step diamond polishing paste used for high-gloss polishing of dental ceramic materials. Luster Paste Flyer ...

    View full details
    $103.00 - $103.00
    $103.00
    $103.00 - $103.00
    $103.00
  • Abrasive, White, Sintered Diamond, Dressing Stone, 100mm Length, 8mm Thick, UNM - 529S-000-UNM - Avtec Dental
    $28.00 - $28.00
    $28.00
    $28.00 - $28.00
    $28.00

    Abrasive, White, Sintered Diamond, Dressing Stone, 100mm Length, 8mm Thick, UNM - 529S-000-UNM

    Meisinger

    Shank Type : UNM - Unmounted Color : White Working Length (mm) : 75 Shape : Dressing Stone

    $28.00 - $28.00
    $28.00
    $28.00 - $28.00
    $28.00
  • Abrasive, White, Sintered Diamond, Dressing Stone, 100mm Length, 8mm Thick, UNM - 529S-000-UNM - Avtec Dental
    $28.00 - $28.00
    $28.00
    $28.00 - $28.00
    $28.00

    Abrasive, White, Diamond, Dressing Stone, 75mm Length, 8mm Thick, UNM - 529D-000-UNM

    Meisinger

    Shank Type : UNM - Unmounted Color : White Working Length (mm) : 75 Shape : Dressing Stone

    $28.00 - $28.00
    $28.00
    $28.00 - $28.00
    $28.00
  • Polisher, Bur Cleaning Brush, Scrubbing Brush, Nylon, 25mm Ø - 431-250 - Avtec Dental
    $26.00 - $26.00
    $26.00
    $26.00 - $26.00
    $26.00

    Polisher, Bur Cleaning Brush, Scrubbing Brush, Nylon, 25mm Ø - 431-250

    Meisinger

    MEISINGER’s Polishers are designed to elevate your restoration process with their ability to produce an effortless, natural luster on restorative m...

    View full details
    $26.00 - $26.00
    $26.00
    $26.00 - $26.00
    $26.00
  • Polisher, Bur Cleaning Brush, Scrubbing Brush, Nylon, 25mm Ø - 431-250 - Avtec Dental
    $26.00 - $26.00
    $26.00
    $26.00 - $26.00
    $26.00

    Polisher, Bur Cleaning Brush, Scrubbing Brush, Nylon, 20mm Ø - 431-200

    Meisinger

    MEISINGER’s Polishers are designed to elevate your restoration process with their ability to produce an effortless, natural luster on restorative m...

    View full details
    $26.00 - $26.00
    $26.00
    $26.00 - $26.00
    $26.00
  • Polisher, Bur Cleaning Brush, Scrubbing Brush, Brass, 25mm Ø - 430-250 - Avtec Dental
    $26.00 - $26.00
    $26.00
    $26.00 - $26.00
    $26.00

    Polisher, Bur Cleaning Brush, Scrubbing Brush, Brass, 25mm Ø - 430-250

    Meisinger

    MEISINGER’s Polishers are designed to elevate your restoration process with their ability to produce an effortless, natural luster on restorative m...

    View full details
    $26.00 - $26.00
    $26.00
    $26.00 - $26.00
    $26.00
  • Steel 1.2 mm, 4 side Lab Cut, Fissure Retightening, HP - 516-012-HP - Avtec Dental
    $48.00 - $48.00
    $48.00
    $48.00 - $48.00
    $48.00

    Steel 1.2 mm, 4 side Lab Cut, Fissure Retightening, HP - 516-012-HP

    Meisinger

    Shank Type : HP - Handpiece Head Size (mm) : 5 Working Length (mm) : 10

    $48.00 - $48.00
    $48.00
    $48.00 - $48.00
    $48.00
  • Steel 1.2 mm, 4 side Lab Cut, Fissure Retightening, HP - 516-012-HP - Avtec Dental
    $68.00 - $68.00
    $68.00
    $68.00 - $68.00
    $68.00

    Stainless Steel Bur, Rust Free, Cross Cut Tapered Round End, Soft Reline Reducer, 5mm Ø, HP - 95RF-050-HP

    Meisinger

    Shank Type : HP - Handpiece Head Size (mm) : 5 Working Length (mm) : 10

    $68.00 - $68.00
    $68.00
    $68.00 - $68.00
    $68.00
  • Stainless Steel Bur, Rust Free, Cross Cut, Rounded Cylinder Soft Reline Reducer, 5mm Ø, HP - 92RF-050-HP - Avtec Dental
    $70.00 - $70.00
    $70.00
    $70.00 - $70.00
    $70.00

    Stainless Steel Bur, Rust Free, Cross Cut, Rounded Cylinder Soft Reline Reducer, 5mm Ø, HP - 92RF-050-HP

    Meisinger

    Shank Type : HP - Handpiece Head Size (mm) : 5 Working Length (mm) : 10

    $70.00 - $70.00
    $70.00
    $70.00 - $70.00
    $70.00